Des-Case Oil Analysis Products

Monitor the health & level of your lubricants with DES-CASE Visual Oil Analysis products (formerly ESCO)

Discover a 360° view of the condition of your oil

Oil sight glasses and other visual oil analysis products play a critical role in early detection of contamination and oil level problems, and allow for constant monitoring of what’s happening inside equipment. These products are installed in the drain port of the oil reservoir of pumps, gearboxes, bearing housings, and other pieces of equipment. Visual oil analysis products provide continuous fluid monitoring of the clarity, colour, sediment, and water contamination in the oil.

DES-CASE 3-D BULLSEYE®

Inspect the oil level easily and accurately with a 360˚ view of what’s happening inside your system with the DES-CASE 3D BullsEye®

The DES-CASE 3-D BullsEye® is machined from one solid piece of impact-resistant acrylic and allows immediate and accurate visual oil level monitoring from virtually any angle. The inherently stain-resistant acrylic holds up to hydrocarbon and petroleum-based products, hydraulic fluids, most silicone fluids and fuels and lasts longer than traditional viewports.

Specifications

Material:

3d_bullseye_270

  • Stain-resistant acrylic
  • Brass fittings standard on 1/4″, 3/8″ NPT, M10X1.0, M10X1.5, & M12X1.5

Recommended Temperature Range:

  • -40°C to 93°C

Maximum Operating Pressure:

  • 65 psi / 4.48 bar

Chemical Compatibility:

  • All mineral and synthetic oils

Available Options:

  • NPT, metric, BSPP threads

Application:

  • Pumps, Gearboxes, Storage Tanks, Viewport Replacement, etc.

 

DES-CASE OIL SIGHT GLASSES

Inspect oil and drain water out of your reservoir with the original solution to oil inspection problems. With the DES-CASE Oil Sight Glass (OSG) users have an immediate visual inspection of the oil and the ability to drain any accumulated water.

The DES-CASE OSG is installed directly to a drain port located at the bottom of a reservoir or with an elbow for drain ports located on the side of the equipment. The spring loaded drain valve is utilised to purge any accumulated water.

Any sediment or particles in the lubricating fluid will migrate to the DES-CASE OSG where, upon inspection, the user can determine the appropriate action.

Specifications

oil_sight_glasses_montage

Material:

  • Stain-resistant acrylic
  • Brass fittings standard

Recommended Temperature Range:

  • -40°C to 93°C

Maximum Operating Pressure:

  • 65 psi / 4.48 bar

Chemical Compatibility:

  • All mineral and synthetic oils

Available Options:

  • 1/4″, 3/8″, and 1/2″ NPT ports
  • 1oz, 3oz, 16oz, and 32oz sizes
  • Stainless steel fittings
  • Magnetic drain valve for collecting ferrous material

Application:

  • Pumps, Gearboxes, Storage Tanks, Fluid-Lubricated Machinery, etc.

 

View our range at: https://www.neilson-hydraulics.co.uk/store/des-case-breathers/des-case-visual-oil-analysis-products

*If you are interested in DES-CASE Visual Analysis Products (formerly ESCO), please contact Neilson Hydraulics on T: 01709 821 002 / E: sales@neilson-hydraulics.co.uk or visit: www.neilson-hydraulics.co.uk

Leave a Comment