Danfoss H1 Bent Axis Variable Displacement Motors –
Size 060/080/110/160/210/250
Danfoss Series H1 Variable Displacement Motors are
bent axis design, incorporating spherical pistons.
These motors are designed primarily to be combined
with other products in closed circuit systems to transfer and control hydraulic
power. Series H1 motors have a large maximum/minimum displacement ratio of 5:1
and high output speed capabilities.
The expanded function of zero degree capability,
coupled with a high performance 32 degree maximum angle, creates opportunities
to easily improve the machine performance for:
- Wheel assist on the steering axle of high inertia
machines (i.e. combines) and could include Anti Slip Control
- Off-highway machines requiring Anti Slip Control
(i.e. Ag. sprayer)
- Multi-motor applications requiring optimized work
and transport modes (i.e. wheel loader, Ag sprayer) utilizing the zero degree
position for maximum transport speed
- Improved machine (i.e. single drum roller)
gradeability through precise Anti Slip Control
The Anti Slip Control reduces ground damage,
increases traction control and improves machine controllability for the
operator.
SAE, Cartridge (not available for 210 cm³ and 250
cm³) and DIN (not available for 250 cm3) flange with radial or axial high
pressure port configurations are available including the loop flushing device.
A complete family of controls and regulators are
available to fulfill the requirements of a wide range of applications.
Motors normally start at maximum displacement. This
provides maximum starting torque for high acceleration.
All controls utilize internally supplied servo
pressure. This may be overridden by a pressure compensator which functions when
the motor is operating in motor and pump modes. A defeat option is available to
disable the pressure compensator override when the motor is running in pump
mode during deceleration/braking.
The pressure compensator option features a low
pressure rise to ensure optimal power utilization throughout the entire
displacement range of the motor.
Speed sensor options are available to cover all
frame sizes and flange styles.
They are capable of sensing the following, all in
one package:
- Speed
- Direction (only group "J", option
"S")
- Temperature (only group "J", option
"S")
- The electric controls are specifically designed for
the Danfoss family of PLUS+1® microcontrollers for easy "Plug and
Perform" installation.
The H1 range of products
- A growing family based on the success of the Series
51 product family:
- Initial release of 060 cm³, 080 cm³, 110 cm³, 160
cm³, 210 cm³ and 250 cm³ displacement size.
To enquire about Danfoss H1 Bent Axis Variable
Displacement Motors and for further technical help / assistance, please call
the team on 01709 821002.
You can also view the Danfoss H1 Bent Axis Variable Displacement Motors Technical
Data Sheet at: https://assets.danfoss.com/documents/53590/BC152886483576en-001213.pdf
This product was added to our catalog on Tuesday 08 November, 2016.
WARNING: An Error occurred, please refresh the page and try again.